Leather is an expensive material and leathercrafting is time-intensive work, so makers want to make sure they select the most cost-effective leather for the job, and time is money. But beyond basic leather choice and color, there are a lot of other decisions to make on which leather to use for which products.
In this post, we'll explain what else you should look for when deciding whether a product is quality - meaning, is it using the right leather for the right purpose to ensure a long and useful life. Plus - why maker-made matters.
There are a few important questions to ask when deciding which is the right leather for a given product or use:
- Does it need to age well or is it planned to be disposable?
- Will it use the hide shape efficiently or will there be a lot of waste?
- Does it need to stretch, or does it need to keep firm?
- Will it be used indoors or outdoors?
- Will it be in wet/mucky conditions or in dry/clean conditions?
- Should it drape with gravity or does it need to hold up on its own?
- Does it need to support the weight of something else? Where are the pressure points?
- Does it need to have a particular color or look?
- Will the edges be showing?
- Does it need to be sewn?
Leather shape
Hides come in irregular shapes and are priced by the square foot, so it's the job of a maker or craftsperson to create regular shapes out of them for products with as little waste as possible. If not done carefully, this can create a lot of waste, which increases costs.
Leather fiber structure
Across each hide are different areas that correspond to different body parts. For example, bellies have lots of stretch, spongy fibers, and the most variable thicknesses. Butts have the tightest fiber structure, but are the most expensive.
Depending on the product and its use, it might make more sense to use the less expensive stretchy area of a hide, or not.
Leather durability
Vegetable-tanned leather does fine in the outdoors so long as it's conditioned from time to time. Bridle leather is infused with waxes to stand up proud against the rigors of sun and rain, but is overly expensive for indoor use.
Garment leather fades and deteriorates in the sun or wet or mucky conditions, but it's the least expensive choice with the most options for color and appearance for draping or indoor uses.
Photo credit: Reddit
Leather weight / thickness
Full grain vegetable-tanned cowhide comes in a variety of thicknesses. They are the same quality of leather, but different thicknesses work for different purposes. More thickness = greater rigidity, but for example a folding cribbage board doesn't need extra rigidity or it wouldn't fold well. On the flip side, a barrel-shaped saddle bag needs rigidity to hold itself proud and to maximize its volume for the protection of its contents.
Leather thickness comes in a unique measuring system called "ounces" but it relates to thickness rather than weight. Hides come usually as an average of two weights because the actual hide may vary thickness across its expanse.
| "Ounce" | Thickness (in.) | Thickness (mm) |
| 1 | 1/64" | 0.4mm |
| 2 | 1/32" | 0.8mm |
| 3 | 3/64" | 1.2mm |
| 4 | 1/16" | 1.6mm |
| 5 | 5/64" | 2.0mm |
| 6 | 3/32" | 2.4mm |
| 7 | 7/64" | 2.8mm |
| 8 | 1/8" | 3.2mm |
| 9 | 9/64" | 3.6mm |
| 10 | 5/32" | 4.0mm |
| 11 | 11/64" | 4.4mm |
| 12 | 3/16" | 4.8mm |
Craftsmanship details - and why maker-made matters
This is where true craftsmanship begins. Manufacturers and craftspeople alike have to make tough choices to keep costs down while providing the best product they can. Often in manufacturing, the cost outweighs the quality.
We consider it to be the job of makers and craftspeople to be the few, the specialists, who are willing to put in the extra time and care to make a quality product, even if it costs more. Somebody's got to do it right!
Some examples of the choices and details that are made with every product:
- Will the edges be showing? For vegetable-tanned leather, the edges may need to be treated so they are the same color as the surface if they are going to be visible - or perhaps the craftsperson may decide to cut this corner to keep costs down. Is it worthwhile to bevel the edges for a finer grip, or wax the edges for wet conditions?
- If it needs to be sewn, is it too thick to get through a standard sewing machine or a tough denim/leather machine? Will it need stronger hand-stitching?
- Does it need to be white, or neon purple? The color may not be achievable on vegetable-tanned leather, but it may be readily available in garment leather.
Photo credit: YouTube
Lesson #7 at the Walnut Workshop
Across our Leather Drawer Pulls Collection, we use 4 different thicknesses of high quality full grain veg-tan leather, matching the right thickness for the right design. For example, some need thick structural integrity to fight gravity and stand off the cabinet door, while others need the stretch and flex to form a tight loop.
Next Lesson
We are proud to be the makers and leather craftspeople making our own designs and our design decisions. Not only does this translate to choosing what we believe to be the right leathers and the right quality we would want in products ourselves, but also the right environmental values.
In the next post, we'll discuss what "sustainable" leather can mean, and how products can be chosen in accordance with cherished values.
We're writing a leather learning series, and this is the seventh of eleven posts. In the series, we go through the different kinds of leather and the different ways it is tanned and finished, then talk about how leather as a raw material is turned into products, how to tell good leather products in the store, how those products should be maintained, and what ethical leather choices are.
Subscribe to our email list to get notified of more posts like these:
Leave a comment (all fields required)